Timer Operations; Timer Playback Of Tape - Kenwood CT Series Instruction Manual

Timer operations

This unit incorporates a built-in timer standby function. By
using an audio timer optionally available in the market,
w ake-up playback and unattended recording of tape can be
started at any time of the day. Connect the pow er cords of
the components directry or indirectly to the timer so that
their pow ers can be turned on via the timer.
The timer setup operation varies depending on the timer.
Also read carefully the instruction manual of your audio
timer.
Preparation

Timer playback of tape

1
Start playback.
2
Adjust the volume of the amplifier.
3
Rew ind the tape(s) to the start position.
4
Set the TIM ER sw itch to PLAY.
5
Set the timer.
1. When connecting the KENWOOD equipment (amplifier, CD player) and the system, remove the disc from the CD player.
2. If relay playback is required, set to "[
3. If tapes are inserted in both decks A and B, timer playback starts w ith deck B.
Notes Notes
4. Sw itch on the pow er to the cassette deck. (The timer w ill not operate if it is sw itched off.)
Downloaded from: http://www.usersmanualguide.com/
1
Set the pow er sw itches of the compo-
nents to ON.
2
Set the input selector of the amplifier to
TAPE.
3
M ake "Playback (recording) preparation".
(If relay playback is required, insert tapes
in both decks A and B.)
REVERSE STOP FORWARD
2 7
1 ¡
TIMER
REC OFF PLAY
[ [
[ " or "" [
Tuner
Amplifier
0
(CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 )
3
÷ Set the timer so that the tape starts at the desired time of the day.
÷ When the set time comes, tape playback starts automatically.
÷ Read carefully the instruction manual of your audio timer.
" "
" " . "
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
Audio timer
23
To AC outlet