Rew Ind & Play Operation; Single-Tune Repeated Playback Operation; Dash & Play Operation - Kenwood CT Series Instruction Manual

Rew ind & Play operation
This operation cannot be performed w ith the remote control (of the separately sold amplifier).

Single-tune repeated playback operation

Dash & Play operation
The Dash & Play skips long non-recorded spaces automatically as the tape is played.
This operation cannot be performed w ith the remote control (of the separately sold amplifier).
1
Determine the playback mode (conditions).
2
Press the 1 and ¡ keys simultaneously.
Downloaded from: http://www.usersmanualguide.com/
Direction of tape direction indicator: 3.
1
2 7 3
Press simultaneously.
Direction of tape direction indicator: 2.
1
2 7 3
Press simultaneously.
1
Play the tune to be repeated.
2
Press the play key of the same direction
as the current tape transport direction.
When direction of tape direction indica-
tor is 3:
2 7
REV.MODE
Press simultaneously.
1 ¡
¡
¡
÷ Tape returns to the beginning of the tape side being played and
playback restarts from there.
÷ Press the stop ( 7 ) key to stop playback and cancel this operation.
3
÷ Normal playback resumes after repeating the same tune for 16 times.
÷ Press the stop ( 7 ) key to stop playback and cancel this operation.
Each press sw itches the indication.
1 "[" : Tw o sides are played only once, after w hich playback
2 """: Tw o sides are repeated 8 times, after w hich playback
3 """: One side is repeated 8 times, after w hich playback
÷ In case the REV.M ODE key is set to "[" and tapes are inserted in both
of the decks, w hen a deck finishes Dash & Play, the other deck starts
Dash & Play for 16 times, after w hich it stops.
÷ Press the stop ( 7 ) key to stop playback and cancel this operation.
Convenient music search (DPSS)
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
stops.
stops.
stops.
15