System Connections - Kenwood CT Series Instruction Manual

System connections

M ake connections as show n below . When connecting the
related system components, refer also to the instruction
6
manuals of the related components.
Caution: Do not plug in the pow er lead until all connections
are completed.
Except for U.S.A., Canada
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater
than, show n below .
Left and right panels: 10 cm, rear panel: 10 cm
PHONO
L
R
Audio cord
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the pow er cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords w ithout removal of the pow er cord can cause malfunctions or damage to the unit.
Downloaded from: http://www.usersmanualguide.com/
REC PLAY
L
R
LINEIN LINEOUT
Audio cords
TAPE
CD TUNER
REC PLAY REC
SYSTEM
LIN E OUTPUT
CON TROL
VARIABLE
L
SL1 6 XS 8
R
M alfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to " In case of difficulty" .
SYSTEM CONTROL
System control cord
M D
PLAY
L
R
System control cord
* The connected component model is
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
AC110- AC220-
120V~ 240V~
To w all AC outlet
SYSTEM CONTROL
SL 16 XS 8
Amplifier
variable dependent on areas.
CD player
∞