To Check The Programmed Tracks; To Add A Track To The Program; To Change A Track In The Program; To Clear Tracks From The Program - Kenwood CD-224M Instruction Manual

To check the programmed tracks

To add a track to the program

To change a track in the program

To clear tracks from the program

To clear tracks from the end
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks w hich are programmed earlier than the track being played
cannot be cleared.
Downloaded from: http://www.usersmanualguide.com/
SPACE/
CHECK
1 Set the CD player to stop mode.
2 Perform steps 2 and 3 of "Program-
ming tracks in desired order".
1 Set the CD player to stop mode.
2 Press the CHECK key.
SPACE/
CHECK
3 Perform steps 2 and 3 of "Program-
ming tracks in desired order".
DELETE/
CLEAR
: Keys and controls used in the operations described on this page.
P G
÷ Each time the key is pressed, the program No. (P-NO) and the disc No.
are displayed.
÷ The previous display resumes in a few seconds.
÷ When a track No. is entered, the track w ill be added to the end of the
existing program.
^
÷ Press the CHECK key repeatedly until the track No, to be changed is
displayed.
P G
^
÷ Press it w hile the " PGM 01 " indicator blinks.
÷ The track being played cannot be changed.
To clear all tracks
÷ When the P.M ODE key is pressed during playback, playback in order of
tracks starts from the track being played.
Programming tracks in desired order (PGM mode)
M 0 1 E D D 2 0 0
M 0 1 E D D 2 0 0
Example
≠
CHARACTER/
P.M ODE
CD-2 2 4 M / DPF-J5 0 1 0 (En)
17
D T 3 0
D T 3 0