To Stop Playback; To Check Or Change The Programmed Tracks; To Add A Track To The Program - Kenwood CD-206 Instruction Manual

To stop playback

To check or change the programmed tracks

1
CD-206/DPF-R6010
REMOTE CONTROL UNIT
RC-P0601
CD-204/203/DPF-R4010/R3010
2
3
4

To add a track to the program

1
2
3
Downloaded From DvDPlayer-Manual.com Kenwood Manuals
7
Press the CHECK key.
CHECK
Press until the track
No. to be changed is
displayed.
CHECK
Press until the track
No. to be changed is
displayed.
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
Select the new track No.
Main unit Remote control unit
1 2
4 ¢
4 5
7 8
0
Set the entry.
P.MODE
Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4
Select the desired track No.
Main unit Remote control unit
1 2
4 ¢
4 5
7 8
0
Press the P.MODE key.
÷ The programmed contents remain in memory.
CD-206/DPF-R6010
P
CD-204/203/DPF-R4010/R3010
÷ Perform only step 1 to simply check the program.
÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display.
(CD-206/DPF-R6010 only)
÷ Each time the key is pressed, the program No. and the track No. on CD
are displayed.
DISC 5
3
÷ Press it while the "PGM 01" indicator blinks.(CD-206/DPF-R6010 only)
÷ Press the key while the "P.C." indicator is lit. (CD-204/203/DPF-R4010/
6
R3010 only)
9 ÷ The track being played cannot be changed.
+10
DISC 5
÷ When a track No. is selected, the track will be added to the end of the
3
existing program.
6
9
+10
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
Blinks.
G M 1 0 D 5 T O
Light up
P.C.
DISC REPEAT
NO. TRACK NO.
7
5
2 5 P _ 0 1
Example
≠
15
N . 5 2