To check the programmed tracks
SPACE
/CHECK
To add a track to the program
1 Set the CD player to stop mode.
2 Perform steps 2 and 3 of "Programming tracks in
desired order".
To change a track in the program
1 Set the CD player to stop mode.
2 Press the CHECK key.
3 Perform steps 2 and 3 of "Programming tracks in
desired order".
To clear tracks from the program
To clear tracks from the end
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
^
SPACE
/CHECK
^
DELETE
/CLEAR
Programming tracks in desired order (PGM mode)
P
G
M
0
1
E
D
÷ Each time the key is pressed, the program No. and the disc No. are
displayed.
÷ The previous display resumes in a few seconds.
÷ When a track No. is entered, the track will be added to the end of the
existing program.
÷ Press the CHECK key repeatedly until the program No, to be changed
is displayed.
P
G
M
0
1
E
D
Example
≠
÷ Press it while the "PGM01" indicator blinks.
÷ The track being played cannot be changed.
To clear all tracks
CHARA.
/P.MODE
÷ When the P.MODE key is pressed during playback, playback in order of
tracks starts from the track being played.
DPF-J5020 (En)
D
2
0
0
D
T 3
0
D
2
0
0
D
T 3
0
17