To Check Or Change The Programmed Tracks; To Add A Track To The Program - Kenwood DPF-R3010 Instruction Manual

To stop playback

To check or change the programmed tracks

1
Press the CHECK key.
CD-206/DPF-R6010
CHECK
REMOTE CONTROL UNIT
RC-P0601
CD-204/203/DPF-R4010/R3010
CHECK
2
Select the disc.
3
Select the new track No.
Main unit
4
4
Set the entry.

To add a track to the program

1
Select the disc.
2
Select the desired track No.
Main unit
4
3
Press the P.MODE key.
7
Press until the track
No. to be changed is
displayed.
Press until the track
No. to be changed is
displayed.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
Remote control unit
1 2 3
¢
4 5 6
7 8 9
0 +10
P.MODE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
Remote control unit
1 2
3
¢
4 5 6
7 8
9
0 +10
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
÷ The programmed contents remain in memory.
CD-206/DPF-R6010
Blinks.
P G M 1 0
CD-204/203/DPF-R4010/R3010
Light up
DISC REPEAT
NO. TRACK NO.
5
2 5 P _ 0 1
÷ Perform only step 1 to simply check the program.
÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display.
(CD-206/DPF-R6010 only)
÷ Each time the key is pressed, the program No. and the track No. on CD
are displayed.
Example
≠
÷ Press it while the "PGM 01" indicator blinks.(CD-206/DPF-R6010 only)
÷ Press the key while the "P.C." indicator is lit. (CD-204/203/DPF-R4010/
R3010 only)
÷ The track being played cannot be changed.
÷ When a track No. is selected, the track will be added to the end of the
existing program.
D 5 T O N . 5 2
P.C.
7
15