Canon Business Inkjet WG7450Z Getting Started page 40

Network & Remote Monitoring Service Connection
Connecting to a Network with a Fixed IP Address
Step 4 Check the connection
EN
Checking that the machine has connected correctly
Entering the IP address directly on a PC on the same network as the machine displays the remote UI screen. The
machine has connected to the network correctly if the remote UI screen is displayed.
1
Start up the web browser.
2
In the address entry bar, enter "http://<the machine's
IP address>/", and then press [ENTER] on the keyboard.
3
The remote UI screen is displayed.
• If the screen shown at right is displayed, the machine has
connected correctly.
• If the remote UI screen is not displayed, refer to the
online manual and check the network connection.
To use a remote monitoring service
Proceed to connecting to a remote monitoring service
and complete settings.
38
For details
"Starting Remote UI", "Installation/Settings Problems" in the Online Manual
P.39
If not using a remote monitoring
service
Continue with settings from "Installing the Software".
P.14