Canon Business Inkjet WG7450Z Getting Started page 13

5
Press <OK>.
• From the screen below, follow these
instructions to enter your network's name
(SSID) and password (network key).
6
Press <SSID Settings>.
7
Press <Select Access Point>.
8
Select the network name (SSID), and press
<Next>.
1. Enter a password (network key), and press
<Apply>.
2. Press <Yes>.
• An IP address will be automatically
assigned.
• <Connected.> is displayed.
Next, adjust the margins of the Cassette
Feeding Unit (optional). P.12
To connect via wired LAN
• With a fixed IP address: Select <No>
and adjust margins. P.12
• By DHCP: Proceed with the following
steps.
1
Press <No> on the connection method
screen.
The machine does not come with a LAN cable.
Please have one ready.
2
Check that your computer and router are
properly connected.
3
Check the network settings on the
computer.
4
Connect the LAN cable.
• After connecting the cable, wait a few
minutes (until the IP address is set
automatically).
Next, adjust the margins of the Cassette
Feeding Unit (optional).
EN
P.12
11