Planet GS-5220 Series User Manual page 148

• Trap Probe Security
Engine ID
• Trap Security Engine
ID
• Trap Security Name
• System
• Interface
• AAA
Indicates the SNMPv3 trap probe security engine ID mode of operation.
Possible values are:
Enabled: Enable SNMP trap probe security engine ID mode of

operation.
Disabled: Disable SNMP trap probe security engine ID mode of

operation.
Indicates the SNMP trap security engine ID. SNMPv3 sends traps and
informs using USM for authentication and privacy. A unique engine ID
for these traps and informs is needed. When "Trap Probe Security
Engine ID" is enabled, the ID will be probed automatically. Otherwise,
the ID specified in this field is used. The string must contain an even
number(in hexadecimal format) with number of digits between 10 and
64, but all-zeros and all-'F's are not allowed.
Indicates the SNMP trap security name. SNMPv3 traps and informs
using USM for authentication and privacy. A unique security name is
needed when traps and informs are enabled.
Enable/disable that the Interface group's traps. Possible traps are:
Warm Start: Enable/disable Warm Start trap.

Cold Start: Enable/disable Cold Start trap.

Indicates that the Interface group's traps. Possible traps are:
Link Up: Enable/disable Link up trap.

Link Down: Enable/disable Link down trap.

LLDP: Enable/disable LLDP trap.

Indicates that the AAA group's traps. Possible traps are:
Authentication Fail : Enable/disable SNMP trap authentication
failure trap.
148
User's Manual of GS-5220 LCD Series