Access Management - Planet GS-5220 Series User Manual

4.12.2 Access Management

Configure access management table on this page. The maximum entry number is 16. If the application's type
match any one of the access management entries, it will allow access to the switch. The Access Management
Configuration screen in Figure 4-12-2
Figure 4-12-2: Access Management Configuration Overview Page Screenshot
The page includes the following fields:
Object
• Mode
• Delete
• VLAN ID
• Start IP address
• End IP address
• HTTP/HTTPS
appears.
Description
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Check to delete the entry. It will be deleted during the next apply .
Indicates the VLAN ID for the access management entry.
Indicates the start IP address for the access management entry.
Indicates the end IP address for the access management entry.
Indicates the host can access the switch from HTTP/HTTPS interface
that the host IP address matched the entry.
429
User's Manual of GS-5220 LCD Series