Honeywell INNCOM e7w Troubleshooting Manual page 30

5. Set LO (Low) value, check fan speed dots, that indicates low value displayed (35 default value displayed). Use
UP/DOWN arrow button to change the value (range is 0-99).
6. Press MODE button to store the new Room ID number scrolling across the display. The unit beeps to confirm
the value is stored in memory. Once the scrolling is completed, screen display rld.
Or
Press FAN button to move between three modes to verify the Room ID.
Press the FC button to return SERVICE MODE or press UP arrow button to display next mode.
7.
Or
Press the FC button twice to exit SERVICE MODE
30 of 47
Honeywell Restricted
13 April 2020
Version 9.0
Medium Value
Low Value