1. Connect the
battery cable
2. Install the
base
cover.
3. Install the
SD memory
card.
4. Follow the procedure in
WLAN card
Removing the WLAN card
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
1. Partially peel off the Mylar sheet that covers the WLAN card [1].
2. Remove the single (M2x2) screw [2] that secures the WLAN card bracket to the WLAN card.
3. Remove the WLAN card bracket from the WLAN card.
4. Disconnect the wireless antennae cables [4] from the connectors on the WLAN card.
5. Slide and remove the WLAN card [5] from the connector on the system board.
after working inside your
computer.
before working inside your
card.
cable.
computer.
Removing and installing components
31