1. Install the
base
cover.
2. Install the
SIM
card.
3. Install the
SD memory
card.
4. Follow the procedure in
Coin cell
Removing the coin cell battery
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
1. Disconnect the coin-cell battery cable from the connector on the system board [1].
2. Peel and lift the coin-cell battery off the computer [2].
after working inside your
computer.
before working inside your
card.
cable.
computer.
Removing and installing components
25