2. Install the
base
cover.
3. Install the
SD memory
card.
4. Follow the procedure in
Speakers
Removing the speakers
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
1. Disconnect the speaker cable [1] from the connector from the system board and peel off the speaker flex cable [2] from the battery.
2. Remove the three (M1.6x1.4) screws [1] that secure the speakers to the system board and lift the speakers off the computer [2].
after working inside your
computer.
before working inside your
card.
cable.
computer.
Removing and installing components
45