Palmrest Assembly - Dell Latitude 9410 Service Manual

8. Stick the USH board cable [1], touchpad cable [2], and LED board cable [3] on the keyboard base.
1. Install the system board
2. Install the battery.
3. Install the heatsink
4. Install the speaker.
5. Install the fan.
6. Install the WWAN card.
7. Install the WLAN card.
8. Install the SSD.
9. Install the coin cell
10. Connect the battery cable
11. Install the base cover.
12. Install the SIM card
13. Install the SD memory card.
14. Follow the procedure after working inside your

Palmrest assembly

1. Follow the procedure in
2. Remove the SD memory
3. Remove the base cover.
4. Disconnect the battery
5. Remove the coin cell.
6. Remove the SSD.
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the fan.
10. Remove the speakers.
11. Remove the heatsink.
computer.
before working inside your
card.
cable.
computer.
Removing and installing components 85