8. Remove the
WWAN
card.
9. Remove the fan.
10. Remove the speakers.
11. Remove the battery.
12. Remove the heatsink.
NOTE:
System board can be removed with heatsink assembly attached.
13. Remove the
system
board.
1. Peel off the USH board cable [1], touchpad cable [2], and LED board cable [3] from the keyboard base.
2. Peel back the two pieces of LTE antenna module copper foil [1, 3] and LTE AUX cable from the keyboard [2].
3. Disconnect the smartcard reader FPC from the USH board [4] and peel off the FPC cable from the keyboard [5].
Removing and installing components
77