quadient DS-200iQ User Manual page 30

DS-200iQ / DS-600iQ
3.4 RUN SCREEN
The Run screen is displayed once a job has been accepted in the Jobs screen, or by
pressing the 'Run' button in the IMOS control panel indicated in Figure 3.23.
Figure 3.23 – Run screen
Run
'Run' button resumes the current job
▪
Pause / Stop
'Pause' / 'Stop' button stops the machine after processing the current
▪
envelope only
Autoend
'Autoend' button stops the machine after processing all documents in the
▪
paper path
USER GUIDE
Single Cycle
'Single Cycle' button allows various adjustments to be made before beginning
▪
the job, see section
AIMS Job indicator
'AIMS Job indicator' indicates whether AIMS is enabled (ON or OFF) for the
▪
current job
Speed Control indicator
'Speed Control indicator' indicates the cycling speed (0-9) of the current job,
▪
press the '+' or '-' to increase or decrease the speed
Job Count indicator
'Job Count indicator' indicates the current job count, and total job count of
▪
the current job, press anywhere inside the job count area to adjust the count
settings, see section
Batch Count indicator
'Batch Count indicator' indicates the current batch count, and total count
▪
of the current job, press anywhere inside the batch count area to adjust the
count settings, see section
Paper Load indicators
'Paper Load indicators' indicate to the operator the correct document/form/
▪
envelope type to be loaded into the various feed points (hoppers etc)
QTL-RND-SCR-00000065-A-00
INTEGRATED MAIL OPERATING SYSTEM (IMOS)
3.4.1 Testing the Mailset for further information
3.4.2 Job Count Settings for further information
3.4.3 Batch Count Settings for further information
3
24
REV 00 JUN 2020