5.1
Wizard
The Wizard guides you to configuring the WBS-202N/WBS-502N in a different mode, including Gateway, Super
WDS, WISP, and AP (repeater) mode.
The default operation mode is AP mode.
Change the PtP switch to optional AP/repeater mode.
5.2
Gateway Mode
Click "Wizard" "Gateway Mode" and the following page will be displayed. This section allows you to configure
the Gateway mode.
User Manual of WBS-202N/WBS-502N
Figure 5-2 Operation Mode
Figure 5-3 Gateway Mode
-20-