Table of Contents
Advertisement
Step 2. Plug the RJ45 Ethernet cable into the PoE port of the Outdoor Wireless CPE. Then, slide back the
cover to finish the installation.
Step 3. Place the mounting strap through the slot on the back of the Outdoor Wireless CPE and then around
the pole. Tighten the mounting strap to secure the Outdoor Wireless CPE.
Figure 3-2 Connecting the Ethernet cable
Figure 3-3 Connecting the PoE injector
-13-
User Manual of WBS-202N/WBS-502N
Advertisement
Table of Contents
