Rheem RIDH09AVFJ Design & Technical Manual page 42

6) Remote controller custom code
(Only for wireless remote controller)
The indoor unit custom code can be changed.
Select the appropriate custom code.
Function number
44
7) External input control
"Operation/Stop" mode or "Forced stop" mode can be selected.
Function number
46
8) Room temperature sensor switching (Aux.)
To use the temperature sensor on the wired remote controller only, change the setting to
"Wired remote controller" (01). This function will only work if the function setting 42 is set at
"Both" (01).
Function number
48
9) Room temperature control for wired remote controller sensor
Refer to Function 95, before performing this setting.
Depending on the installed environment, correction of the wired remote controller
temperature sensor may be required.
Select the appropriate control setting according to the installed environment.
To change this setting, set Function 42 to Both "01".
Ensure that the Thermo Sensor icon is displayed on the remote controller screen.
Function number
92 93
(For cooling) (For heating)
Setting value Setting description
00
01
02
03
Setting value Setting description
00 Operation/Stop mode
01 (Setting prohibited)
02 Forced stop mode
Setting value Setting description
00
01 Wired remote controller
(  . . .Factory setting)
Setting value Setting description
00 No correction 0.0°F 0.0°C
01 No correction 0.0°F 0.0°C
02 -1°F (-0.5°C)
03 -2°F (-1.0°C)
04 -3°F (-1.5°C)
05 -4°F (-2.0°C)
06 -5°F (-2.5°C)
07 -6°F (-3.0°C)
08 -7°F (-3.5°C)
09 -8°F (-4.0°C)
10 +1°F (+0.5°C)
11 +2°F (+1.0°C)
12 +3°F (+1.5°C)
13 +4°F (+2.0°C)
14 +5°F (+2.5°C)
15 +6°F (+3.0°C)
16 +7°F (+3.5°C)
17 +8°F (+4.0°C)
- (01 - 39) -
(  ... Factory setting)
A 
B
C
D
(  ... Factory setting)

(  ... Factory setting)
Both


More cooling
Less heating
Less cooling
More heating