Elation FUZE PENDANT User Manual page 20

S Y S T E M M E N U – D M X S E T T I N G S
DMX ADDRESS
This function allows the user to define the DMX address of the fixture. This value is displayed as
"AXXX" where XXX represents a 3-digit numerical values from 001 – 512.
DMX CHANNEL MODE
This function allows the user to define the DMX channel mode in which the fixture will operate. See
the DMX Channel Functions section for full details on which functions are included in each DMX
channel mode.
NO DMX STATUS
This function allows the user to define the behavior of the fixture in the event that DMX signal is lost.
The user may select from one of the following options:
- Hold Last: The fixture adheres to the color and intensity settings that were in use immediately
before DMX communication was lost, and continues to do so until DMX communication is re-
established or a power cycle occurs. Please note that this mode is the fixture's default setting.
- Fade to Black: The fixture fades to 0% intensity in the time span dictated by the Standalone
Fade Time setting. Please refer to the SYSTEM MENU – STANDALONE section for details.
- Standalone: The fixture reverts to the Color Temperature and Virtual Color settings defined in
the Standalone menu, in a time span dictated by the Standalone Fade Time setting. Please refer
to the SYSTEM MENU – STANDALONE section for details.
- 0-10V: The fixture reverts to the Color Temperature and Virtual Color settings defined in the
Standalone menu, with the output intensity dictated by the 0-10V input.
PRIORITY
This function allows the user to select whether the DMX signal or the 0-10V voltage level determines
the intensity of the light output.
20