Table of Contents
Advertisement
F I X T U R E I N S T A L L A T I O N G U I D E L I N E S
RIGGING
Overhead rigging requires extensive experience, including calculating working load limits, knowledge
of installation material being used, and periodic safety inspection of all installation material and the
fixture, among other things. If you lack these qualifications, do not attempt the installation yourself.
Improper installation can result in bodily injury.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade rigging
clamp to the included Pendant Bracket or the optional Yoke Bracket using an M10 screw fitted
through the center hole. The fixture provides a built-in rigging point for a SAFETY CABLE. Be sure to
only use one of the designated rigging points for the safety cable and never secure a safety cable to
the Pendant or Yoke Brackets.
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE (NOT INCLUDED) THAT
MEETS ALL LOCAL, NATIONAL, AND COUNTRY CODES AND REGULATIONS WHENEVER
INSTALLING FIXTURE IN A SUSPENDED ENVIRONMENT!
SAFETY CABLE
ATTACHMENT POINT
ALWAYS ATTACH A SAFETY CABLE
WHENEVER INSTALLING THIS FIXTURE IN
A SUSPENDED ENVIRONMENT TO
ENSURE FIXTURE WILL NOT DROP IF
MOUNTING / RIGGING HARDWARE FAILS.
15
Advertisement
Table of Contents
