Table of Contents
Advertisement
There was an unfounded warning or system inter-
vention
›
Clean the front radar sensor.
›
If the system is not working properly, disable Front
Assist and seek the help of a specialist garage.
Pedestrian detection system
Functionality
Pedestrian recognition helps to prevent a collision
with crossing pedestrians by enabling automatic
braking interventions.
Status display in the instrument cluster display
lights up - Danger of collision
Risk of collision in a speed range of 5-30 km/h
The system triggers automatic braking.
Risk of collision in a speed range of 30-60 km/h
The system warns of a collision hazard first. If the
driver does not respond, the vehicle is automatically
braked.
Operating conditions
✓ Front Assist activated.
✓ Driving speed between 5-60 km/h.
Speed limiter
Functionality
The speed limiter controls the maximum driving
speed according to the set speed limit.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Status display in the instrument cluster display
illuminated - the cruise control is activated.
When the control starts,
set limit is displayed.
illuminated - cruise control is active
flashing - the set limit is exceeded
Operating conditions
✓ The driving speed is higher than 30 km/h.
If no speed limit is set, the current speed is set as the speed limit.
1)
Driver assist systems ›
is highlighted and the
Pedestrian detection system
Operation
Variant with GRA
A
Activate GRA (condition for the subsequent
activation of the limiter).
To Enable speed limiter, press the key
the instrument cluster choose the menu item
Speed limit.
Deactivate limiter
Interrupt control (sprung position)
B
1)
Resume control
/Increase limit
C
Start control with current speed/Reduce
limit
D
Show menu of assist systems - Possibility of
switching between GRA and speed limiter
Switching to GRA interrupts the control.
Adjusting the speed limit with the buttons
C
By pressing in steps of 1 km/h.
By holding in steps of 10 km/h.
Variant with ACC
Activate ACC (condition for the subsequent
activation of the limiter). To enable the speed
limiter, press the key
ment cluster choose the menu item Speed limit.
131
and in
D
and
B
and in the instru-
Advertisement
Table of Contents
