Skoda SUPERB iV Owner's Manual page 62

60 Driver information system ›
In infotainment
Distance travelled
A
Driving time
B
Average speed
C
Average fuel consumption
D
Average power consumption
E
Fuel range
F
Electric range
G
Graphical fuel and power supply gauge - If the
H
expected range is less than 300 km, the vehicle
slowly approaches the symbol
Total range
I
Memory
The system saves the driving data in the following
memories.
Since start
Driving data from the time of switching on the ig-
▶
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long-term
The driving data of all trips up to a total of 99
▶
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
Since refuel
Driving data from the time the fuel tank was last
▶
filled is stored in the memory. The memory is reset
the next time the tank is filled.
Operation
Display driving data in the display of the instru-
ment cluster via the operating lever
›
The menu item for the driving data in the main
menu in the display of the instrument cluster.
Driving data
Press - Select infor-
A
mation/Set values
Press - Confirm in-
B
formation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
›
The menu item for the driving data in the main
menu in the display of the instrument cluster.
Displaying driving data in the infotainment system
The driving data is displayed in the menu in the info-
tainment system.
Menu item for drive data
Or:
Menu item for the driving data
Select and reset the memory for driving data in
the display of the instrument cluster using the
control lever
.
A
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
Selecting the memory in the infotainment system
To select the memory, use the functional areas
in the following menu in the infotainment system.
Menu item for drive data
Or:
Menu item for the driving data
Rotate - Select in-
A
formation/Set values
Press - Confirm in-
formation
›
To set the memory for
the displayed driving
data, press button
A
repeatedly.
›
To reset the memory,
press and hold button
›
To set the memory for
the displayed driving
data, press selection
wheel repeatedly.
A
›
To resetthe memory ,
hold the dial .
A