Table of Contents
Advertisement
›
Stop the engine and start again.
›
If Front Assist is still unavailable, check the brake
lights on the vehicle or on the attached trailer.
›
Replace the defective bulb.
›
If the brake lights are working and Front Assist is
still unavailable, seek the help of a specialist ga-
rage.
There was an unfounded warning or system inter-
vention
›
Clean the front radar sensor.
›
If the system is not working properly, disable Front
Assist and seek the help of a specialist garage.
Pedestrian detection system
Functionality
Pedestrian recognition helps to prevent a collision
with crossing pedestrians by enabling automatic
braking interventions.
Status display in the instrument cluster display
lights up - Danger of collision
Risk of collision in a speed range of 5-30 km/h
The system triggers automatic braking.
Risk of collision in a speed range of 30-60 km/h
The system warns of a collision hazard first. If the
driver does not respond, the vehicle is automatically
braked.
Operating conditions
✓ Front Assist activated.
✓ Driving speed between 5-60 km/h.
Speed limiter
Functionality
The speed limiter controls the maximum driving
speed according to the set speed limit.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Status display in the instrument cluster display
illuminates - the cruise control is activated.
When the control starts,
set limit is displayed.
illuminates - cruise control is active
flashing - the set limit is exceeded
If no speed limit is set, the current speed is set as the speed limit.
1)
Driver assist systems ›
is highlighted and the
Pedestrian detection system
Operating conditions
✓ The driving speed is higher than 30 km/h.
Operation
Variant without cruise control
A
Activate limiter (control inactive)
Deactivate limiter
Interrupt control (sprung position)
1)
B
Resume control
C
Start control with current speed / Reduce
limit
Variant with cruise control
A
Activate cruise control (condition for the
subsequent activation of the limiter).
To enable the speed limiter, press the key
and in the instrument cluster choose the menu
item Speed limit.
Deactivate limiter
Interrupt control (sprung position)
1)
B
Resume control
C
Start control with current speed / Reduce
limit
D
Show menu of assist systems - Possibility of
switching between cruise control and speed lim-
iter
Switching to cruise control interrupts the con-
trol.
127
/ Increase limit
D
/ Increase limit
Advertisement
Table of Contents
