Fasten in the front
The procedure is analogous to the process behind.
Before installing, fold back the rear seat backrests.
Releasing
›
Open the lid of the roll-up cover.
›
Move the rod first to one side and then to the oth-
er side, and take it out of the supports.
›
Hold the pole and allow the net partition to slowly
roll in.
›
Open the lid of the roll-up cover.
Remove housing and insert
Removal
›
Fold the rear seat backrests forwards.
›
Open the door at the right rear.
Inserting
Troubleshooting
Blocked net partition
Storage space and interior equipment ›
›
Move and swing out
the housing.
›
Insert the housing into
the supports and move
it.
›
To unlock, press the
lock button.
Removable light
Overview
The batteries in the light are charged while the
engine is running.
A full charge of the batteries takes about 3 hours.
Remove and insert
NOTICE
Protect the light from moisture.
▶
Removing
Thanks to the integrated magnets, the light can
be attached, for example, to the vehicle body.
Inserting
Removable light
171
Button for switching
A
on and off
Light (lights up when
B
the light is in the
bracket and the boot
lid is open)
Light (lights up when
C
the light is outside
the bracket)
›
Grasp the light in area
and swivel it out.
A
›
Insertion takes place in
reverse order.