Table of Contents
Advertisement
152 High-voltage system ›
Warning light vehicle
G
Reset button to reset the fault indications on the
H
control box. Hold down the reset button for at
least 3 secs.
Follow the information and safety instructions on the
label on the charging cable.
Operating displays (Mode 2)
Display
illumi-
A B
nates
High-voltage battery is charging
a)
flashes
C
Charging cable connected to the
illumi-
mains and to the vehicle. Charg-
A B C
ing has not started or has already
nates
been completed.
illumi-
Charging cable connected to the
A B
mains but not to the vehicle.
nates
Charging cable connected to the
illuminates
A
mains for along time, but not to
flashes
B
the vehicle.
a)
If the indicator light
C
ing current is limited.
Temperature monitoring (Mode 2)
The charging cable is equipped with a temperature
control on the control box and the mains plug.
The temperature monitoring triggers when the
charging cable heats up too much, e.g. if it is carried
in an overheated luggage compartment or in strong
sunlight.
When the charging current through the control box
is reduced, the warning light flashes red
One or more indicator lights
flash.
As soon as the charging cable has cooled down suffi-
ciently, the charging current is automatically in-
creased again. If charging is interrupted by the con-
trol box, the indicator
goes out.
C
›
Disconnect the charging cable and allow it to cool.
›
If the problem persists, seek the help of a specialist
company.
Fault indications (Mode 2)
A fault indication with one or more red warning
lights will interrupt the charging process.
›
Seek the help of a specialist garage.
The control box can also recognise the following sit-
uations as a fault.
A charger is connected to the 12 volt vehicle bat-
▶
tery.
The vehicle is in close proximity to high voltage
▶
power lines.
Charging cable
Meaning
slowly blinks, the charg-
or
.
E
F
light up or
A B C
The vehicle is not on its wheels, but, for example,
▶
raised up with a lift.
Disruption to the electrical installation (Mode 2)
If the indicator light flashes or lights up
the indicator light
flashes or lights up red, charg-
E
ing is interrupted.
›
Check if it is possible to charge it using a different
mains socket.
›
Have the mains socket or electrical installation
checked by a specialist electrician.
yellow or
D
Advertisement
Table of Contents
