Securing La-Rak Ii Avb On La-Rakmount - L-Acoustics K Series Owner's Manual

Rigging procedures

Securing LA-RAK II AVB on LA-RAKMOUNT

Type of deployment
Rigging accessories
Additional accessories
Min number of operators
Procedure
1. Position and secure the two rails on the K3-BUMP.
Use the electric screwdriver. Set the torque to 5 N.m. Before securing the side rails, make sure the frame pins are on
the outside.
*
The following procedure is also applicable for previous LA-RAK products.
80
own array
LA-RAKMOUNT (2 rails for 1 LA-RAK II AVB
8 M8×30 screws (provided with LA-RAKMOUNT)
K3-BUMP
LA-RAK II AVB
electric screwdriver with torque selector
2
T30
*
)
5 N.m
K3 owner's manual (EN) version 1.0