a damp cloth and washingup liquid. Replace the filter cassette and press it
upwards so that it clicks into place.
3.2.2.
CHANGING THE FLUORESCENT TUBE
Fig. 7
The lamp lens can be removed by pressing the snap retainers in the direction
shown by the arrow; see Fig. 7. The fluorescent tube is now accessible for
replacing.
4.
WARRANTY
1. All equipment manufactured in our factory is checked in operating condi-
tions and tested befor delivery. Test protocol is supplied together with the unit.
The equipment is shipped in good working order and condition to the direct
client. The unit is warrantied for the period of 24 month from the invoice date.
2. If equipment is found to have been damaged during transportation, a claim
should be made against carrier, as we assume no responsibility for such
damage.
3. This warranty does not apply:
3.1. when transportation, storage, installation and maintenance instruc-
tions of the unit are violated;
3.2. when the equipment is improperly maintained, mounted - inadequate
maintenance;
3.3. when the equipment without our knowledge and permission has been
upgraded or unskilled repairs were made;
3.4. when the unit was used not for its original purpose.
3.5. Company SALDA UAB is not responsible for potential loss of property
or personal injury in cases where AHU is manufactured without a control
system and the control system will be installed by the client or third parties.
The manufacturer's warranty does not cover devices that will be damaged
by installing the control system.
4. This warranty does not apply at these malfunction cases:
4.1. mechanical damage;
4.2. damage caused by entering outside objects, materials, liquids;
4.3. damage caused by natural disaster, accident (voltage change in the
electricity network, lightning, etc..).
5. The company assumes no liability for its products either directly or indirect-
ly damage, if the damage is caused by failure to comply with installation and
mounting regulations, deliberate or careless users or third-party behavior.
These conditions are readily discernable when the equipment is returned to
our factory for inspection.
If the direct client determines that equipment is found to be faulty, or a break-
down occurred, he should inform the manufacturer within five working days
and deliver the equipment to manufacturer. Delivery costs should be covered
by customer.
Manufacturer reserves the right to change this technical pass-
port any time without prior notice, if some typographic errors
or inaccurate information is found, as well as after improving
the apps and/or the devices. Such changes will be included
in the new issues of the technical passport. All illustrations
are just for information and thus may differ from the original
device.
4.1.
LIMITED WARRANTY COUPON
Warranty term
24-month warranty*
I received complete package and technical manual of the product ready for
usage. I have read warranty terms and conditions and agree with them:
....................................................................................................................................................
Customer's signature
*refer to WARRANTY CONDITIONS
Dear User, we appreciate your choice and do hereby guarantee that all venti-
lation equipment manufactured by our Company is inspected and thoroughly
tested. An operational and high-quality product is sold to the direct buyer and
COOKER HOOD FOR SMARTY 2R UNIT
EN
OPERATING INSTRUCTIONS
Need help?
Do you have a question about the SMARTY 2R and is the answer not in the manual?
Questions and answers