Time & Date - Salus Optima ST880ZB Manual

Section 2
Time & Date
The ST880ZB Optima Thermostat should be configured by an experienced or authorized installer.
Step 1. After pressing MODE to
illuminate the screen and prepare
the ST880ZB for input . Press
and hold the MODE button for 3
seconds to enter the configuration
menu . will appear on the
screen .
Step 3. Use the +/- buttons
to change between 12- and
24-hour display format . Press
MODE to accept .
Module 4 – Wireless HVAC Thermostats
ST880ZB Optima Zigbee Thermostat
Step 2. Release and press the MODE button again to adjust the time
zone . The default
the time zone chart above for the time zone settings available . Press
Mode to accept the value and the screen will advance to 12- or 24-
hour display format selection .
Step 4. The display shows the time
with the hours flashing . Use the
+/- buttons to change the hour
value noting the correct am/pm
designation . Press MODE to accept .
Table 2.1: Time Zones
Newfoundland Standard
NST
1
Time
AST Atlantic Standard Time
1
EST Eastern Standard Time
CST Central Standard Time
MST Mountain Standard Time
PST* Pacific Standard Time
AKST Alaska Standard Time
HST HawaiiStandard Time
* Default 1-Canada Only
is can be changed by pressing + or - . See
Step 5. When the minutes are
flashing, use +/- to update the
minutes display . Press MODE to
accept the value and proceed to
setting the date .
2-10