Installation - auna Stockton Manual

INSTALLATION

Putting the batteries into the remote
1. Open the battery cover.
2. Insert the supplied battery according to the terminal indicated in the
battery compartment. When inserting or removing the battery, push it
towards the (–) battery terminals.
3. Close the cover.
Safety notes for the use of batteries
• Remove the battery if the unit will not be used for a long period of time.
This will prevent potential damage due to battery leakage.
• Do not use rechargeable battery (nickel-cadmium battery, etc.).
• Installing the battery incorrectly may cause the unit to malfunction.
• Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Notes on using the remote control
• Replace the battery if the operating distance is reduced or if the
operation becomes erratic. Purchase an "AAA" size battery (UM-4/SUM-
4 size similar).
• Periodically clean the transmitter on the remote control and the sensor
on the unit with a soft cloth.
• Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this occurs.
• Keep the remote control away from moisture, heat, shock, and
vibrations.
EN
33