Fm Radio Functions - auna Stockton Manual

FM RADIO FUNCTIONS

Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the FM ST. button will
switch between stereo audio and force mono audio.
Displaying FM station information
Radio Text: Scrolling text which shows information on music titles or
1.
program details provided by the radio station.
2. Program Type (PTY): Type of program provided by the broadcaster
3. Audio Type: Stereo or Mono.
Access other FM menu functions
• Press the MENU button to access the menu control.
• Turn and press the Select dial or use the TUNE
on the remote control for different options as described below.
Scan setting
1. Press the MENU button to access the menu control.
2. Turn and press the Select dial or use the TUNE
remote control to until "Scan setting" is displayed and then press the
SELECT button.
3. Turn and press the Select dial or use the TUNE
on the remote control to toggle between "All stations" or "Strong
station" selections and then press the SELECT button confirm. When
"All stations" is selected, all stations will be detected during FM
scanning even if the radio station is noisy. When the "Strong station" is
selected, only the strong stations are detected. Scanning will ignore the
noisy stations.
4. The next time doing a FM scan the unit will search for the stations
based on this confirmed setting.
Audio Setting
1. Press the MENU button to access the menu control.
2. Turn and press the Select dial or use the TUNE
on the remote control until "Audio setting" is displayed and then press
the SELECT button.
3. Turn and press the Select dial or use the TUNE
on the remote control to toggle between "Stereo allowed" or "Forced
mono" selection and then press the SELECT button confirm.
or TUNE button
or TUNE on the
or TUNE button
or TUNE button
or TUNE button
EN
39