Aux In - auna Stockton Manual

EN
42
BT
Please follow the pairing instructions below to link the unit to your BT
device:
1. Press the BT button on the remote control or SOURCE button
repeatedly on the main unit to enter the BT mode. The display will show
"BT". It will start searching and will display a flashing "BT AUDIO".
2. If the unit has never been paired with a BT device before or cannot
find the last paired device, the display and the BT status indicator will
keep on flashing. Turn on the BT function of your device and enable the
search until "Stockton" is found. Select "Stockton" on the BT device to
make connection. Enter the pass code "0000" if required.
3. After successfully paired the unit will display steady "BT AUDIO".
4. You can now start playing music from your smart phone wirelessly to
the speaker.
5. You can press the BT PLAY/PAUSE
playback.
6. You can press the BT PREVIOUS
the previous or next song.
NOTE: Press and hold the PAIR button on the unit will disconnect the
current connection and start to search another new BT device.

AUX IN

This allows you to connect an external player's sound through your unit.
1. Plug a 3.5 mm audio cable (not included) into your external player's line
out and the other end into the AUX IN jack.
2. Press the AUX button on the remote control or SOURCE button
repeatedly on the main unit to enter AUX mode. Display shows "AUX"
3. Start your external player to play music.
4. The unit will output the sound.
button to pause or resume the
or NEXT button to search to