Main Features - MSA ORION Manual

Four-Head Gas Detector: MSA Orion
2.2

Main features

1
2
3
4
5
Part
1 Alarm lights
2 Pump cap
3 LCD
4 LCD
5 On/Off/Page button
Gas inlet/probe
6
connection
7 Gas outlet
8 Inlet filters
9 Change/Reset button
10 Speaker
11 Battery pack screws
12 Unit ID
13 Battery pack
14 Belt clip
D.I. Rec-ommended Practice
FILE: W:\NB\RP HMRU\Orion\Frame Ver 02\Orion.fm
Figure 3 Orion gas detector main features
6
7
8
9
10
11
Table 2: Orion main features
Explanation
Flash red during alarm conditions.
The pump cap covers the sensors.
This section of the LCD displays date, time, battery charge,
and alarm indicators.
This section of the LCD displays gas concentrations.
Power on and off, and scroll through displays.
For connection of the sampling probe and calibration nozzle
for calibration/challenge gas.
Gas outlets are located in both sides of the pump cap.
Dust filter and internal water stop.
To change values, and acknowledge alarm conditions.
Issues audible alarms.
Remove to change batteries.
Fire and Rescue NSW identification chip.
For 3 x alkaline batteries.
For attaching to belt, if required.
Version 02 Issued February 2011
© Copyright State of NSW (Fire and Rescue NSW) 2011
5
12
13
14