Table of Contents
Advertisement
www.ti.com
3.3.5.1.1
Time Domain Display
The time domain graph displays the conversion results of an analog input channel of a sampled data set.
When in manual mode, the graph can only display one analog input conversion results at a time; in auto-
sequence mode, all sampled channels are displayed. As shown in
the drop-down menu shown.
Within the time domain graph, the high and low thresholds (configured in
automatically displayed
triggers an alarm. Hysteresis (if configured), is also displayed within this graph as dashed red lines.
Figure 22. Time Domain Display With Threshold and Hysteresis
SBAU331 – May 2019
Submit Documentation Feedback
Figure 21. Time Domain Channel Selection
inFigure 22
as solid red to visually demonstrate the levels that the analog signal
Copyright © 2019, Texas Instruments Incorporated
BP-ADS7128 EVM Initial Setup
Figure
21, select the channel through
Section
3.3.2.2) are
BP-ADS7128 BoosterPack™ Plug-In Module
21
Hide quick links:
Advertisement
Table of Contents
