Table of Contents
Advertisement
www.ti.com
3.3.5.1.3
Alarm
As shown in
Figure
triggered, as demonstrated in the analog inputs page within the data capture tab. This page provides an
ALARM section where the corresponding image to the threshold crossed, high or low, turns red when
triggered. The alarm can be cleared by clicking on the red icon.
SBAU331 – May 2019
Submit Documentation Feedback
24, if an analog input signal crosses the configured thresholds, then an alarm is
Figure 24. Alarm Triggered
Copyright © 2019, Texas Instruments Incorporated
BP-ADS7128 EVM Initial Setup
BP-ADS7128 BoosterPack™ Plug-In Module
23
Hide quick links:
Advertisement
Table of Contents
