TI ClockPro™ Programming Software
Wizard Window, it directs to the Solution Selection Window
4. Refresh updates the choices in (1).
1. Solution Selection selects the solution to view when pressing the button View Setup (3). Many
different solutions can be generated by different combinations of the devices and the input stage.
2. Device Selection chooses the initial setup to load in the Main View
3. View Setup loads the selected device for the selected solution in the Main View
4. Skip button skips loading a solution showing the Main View
5. Back button goes back to the Wizard View
10
CDCE(L)9xx Performance Evaluation Module
Figure 7. TI ClockPro™ Solution Selection Window
(Figure
Copyright © 2007–2010, Texas Instruments Incorporated
(Figure
7).
(1)
(2)
(3)
(4)
(5)
(Figure
8).
(Figure
8).
5).
SCAU022A – July 2007 – Revised July 2010
www.ti.com
(Figure
8).