Foreword; Purpose And Scope Of This Manual; Symbols And Definitions; General Information - Telair ENERGY 8012 GAS Use And Maintenance Manual And Instructions For Installation

Table of Contents

Advertisement

1 FOREWORD

Refer carefully to this man-
ual before performing any operation on the air
conditioner.

1.1 Purpose and scope of this manual

This manual has been drawn up by the Manufac-
turer in order to provide basic information and in-
structions for performing every operation for ser-
vicing and using the generating set in a proper
and safe manner.
It is an integral part of the equipment of the gen-
erating set, must be kept with care throughout the
life of the same, and must be protected against
any agent which could damage it.
It must follow the generating set if the latter is in-
stalled on a new vehicle, or if its ownership
changes hands.
The information in this manual is addressed to
the personnel which must install the generating
set, and to all those involved in its maintenance
and use.
This manual sets out the purpose the machine
was designed for, and contains all the information
required to guarantee that it is used in a safe and
proper fashion.
Constant attention to the instructions laid down
here will guarantee the safety of the user, econ-
omy and longer life of the machine.
To facilitate reference, this manual has been
subdivided into chapters which specify the main
notions; for quick consultation, refer to the table
of contents.
The most important parts of the text are in bold
letters and preceded by symbols described be-
low.
It is strongly recommended that you read the con-
tents of this manual and the reference documents
carefully; doing so is essential to the correct long-
term performance and reliability of the generator
set and the prevention of injury and/or damage.
Note: The information contained in this publica-
tion was correct at the time it went to print, but
may be modified without advance notice.
Vers. 001
GB

1.2 Symbols and Definitions

"Graphic safety symbols" have been employed in
this booklet to identify different levels of danger or
important information.
pay attention to avoid serious consequences
which might lead to serious accidents or damage
the health of the operators.
hazardous situation which could lead to accidents
or to damage to property.
to a potentially dangerous situation which could
cause malfunction or damage to the machine.
The drawings are only provided by way of exam-
ple.
Even though the machine you actually have may
differ from the illustrations contained in this man-
ual, safety and information about the same are
guaranteed.
The manufacturer, as part of his policy of con-
stant product development and updating, may ef-
fect changes without providing advance notice.

1.3 General Information

The ENERGY 8012 GAS generating set has
been designed for installation on vehicles. It can
supply power at a voltage of 13.5 Vdc.
The ENERGY 8012 GAS model must be fed with
LPG.
In order to achieve a low noise level, the EN-
ERGY series generating sets are provided with
internally insulated sound-proofing boxes.
They can be accessed easily in order to perform
maintenance work, and are provided with a re-
mote control panel which can be installed inside
the vehicle.
Energy 8012 G
This means that you must
This means a potentially
This calls the user's attention
5

Advertisement

Table of Contents
loading

Table of Contents