Summary of Contents for Happybeds Lynx 4 Door Combination Wardrobe
Page 1
DO NOT use this product if any parts are missing, damaged or worn. DO NOT use this product unless all fixings are secured. Please keep small parts out of reach of children. Always use on a level, even surface. Please keep these instructions for future reference. www.happybeds.co.uk...
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 4
Vendor: S000139 Parts List Identification of Accessories Part Descripion Part Descripion Top Panel 5 x 60 mm Screw Shelf Glue Base Panel Spine Left Panel 3.5*20mm Screw Right Shelf Divider Bushing Left Shelf Divider Metalic Angle Plates Drawer Cabinet - Right Panel Metal Claw Right Panel Hinge Bracket...
Page 5
Vendor: S000139 Step 1: Prepare these parts for assembly using hardware parts B5, E, F6, J, S, V4 and V5. You will need to use a small mallet and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Page 4...
Page 6
Vendor: S000139 Step 1: Prepare these parts for assembly using hardware parts D5, E, E7, F, J, N, P5, S, WA, WB and Z4. You will need to use a small mallet and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. ATENÇÃO PARA POSIÇÃO ATENTION FOR POSITION ATENCION PARA POSICION...
Page 7
Vendor: S000139 Step 2: Attach the drawer cabinet right panel (7) and darwer cabinet left panel (13) to the base panel (3) using hardware part O and a screwdriver (not proveded). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 3: Attach the plinths (22) to the b ase panel (3) using harware parts B5 and S with a screwdriver (not provided).
Page 8
Vendor: S000139 Step 5: Attach the supports using hardware parts L and M with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 6: Attach the right panel (8) and shelf (2) using hardwareparts L and M and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 9
Vendor: S000139 Step 7: Secure the shelf (2) to the supports using hardware parts L, M and K. Position the hanging rain (R4). Attach the left panel (4) using hardware parts L and M. You will need to use a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 10
Vendor: S000139 Step 9: Attach the top panel (1) using hardware parts L and M with a screwdriver (not provided). Secure the back panels (23) using hardware parts C1, N, o1 and A8 with a small mallet and screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 11
Vendor: S000139 Step 11: Assemble the drawer components using hardware parts L, M, O, P5, T, WC and WD with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 12: To secure the item to the wall use hardware parts A, B3 and E9 using a screwdriver (not provided).
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...