Summary of Contents for Happybeds Winchester 2 Door Wardrobe
Page 1
Assembly Instructions Winchester 2 Door Wardrobe Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 3
Hardware List Part Item Parts List Wooden Dowel Part Item Cam Bolt Right Side Left Side Cam Lock Base Tack Slip Shoe Middle Top 25mm Screw Back Traverse 14mm Screw Column Sticker Bottom Traverse Handle Upper Traverse Hat Stand Suport Baseboard 45mm Screw Back...
Page 4
Vendor: S000401 Step 1: Insert the hardware (A) into the back traverse (6) and baseboard (10). Do NOT use any power tools are this may damage the frame and will invalidade any claim. Step 2: Insert the hardware (B) in the right side (1), left side (2), top (4), column (7) and bottom traverse (8).
Page 5
Vendor: S000401 Step 3: Assemble column (7) to the right side (1) and left side (2) using hardware (C). Do NOT use any power tools are this may damage the frame and will invalidade any claim. Step 4: Attach the bottom traverse (8) to the base (3) using hardware (C). Then fix hardware (M) onto the base (3) using hardware (G).
Page 6
Vendor: S000401 Step 5: Attach hardware (L) to the door (12) using hardware (G). Attach hardware (I) to the door (12) using hardware (K). Do NOT use any power tools are this may damage the frame and will invalidade any claim. Step 6: Attach the base (3) and middle top (5) to the right side (1) and left side (2) using hardware (C).Then attach the baseboard (10) and back traverse (6) to the right side (1) and left side (2) using hardware (A) and (C).
Page 7
Vendor: S000401 Step 7: Attach the top (4) using hardware (C). Then attach hardware (E) and (D) to the bottom of the right side (1) and left side (2). Attach the upper traverse (9) to back traverse (6) using hardware (F). Insert the hardware (O) inside the product, above the hardware (J).
Page 8
Vendor: S000401 Step 9: Fix door (12) to the right side (1) and left side (2) using hardware (G), (L) and a screwdriver (not provided). Insert hardware (H) over the holes show below. Attach the safety strap (P) to the back of the wardrobe and wall following the diagram. Do NOT use any power tools are this may damage the frame and will invalidade any claim.
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...