Summary of Contents for Happybeds URBAN Wooden 2 Door Wardrobe
Page 1
Assembly Instructions Title of Product URBAN Wooden 2 Door Wardrobe Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 3
Vendor: S000350 Parts List Hardware List ( BOX 2 ) Part Descripion Part Description Top panel Cam lock Bottom panel Minifix screw Side panel ( Left ) Plastic cap Side panel ( Right ) M8 x 30mm Wood Dowel Middle panel M6 x 50mm CSK Cap Wood screw Door panel ( Left &...
Page 4
Vendor: S000350 Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, D, E, L and M. DO NOT use any power tools as this may damage the frame and will invalidate any claim. A2 A2 A2 A2 A2 A2 A2 A2 Step 2: Attach the panel (5) and (7) to panel (3) using hardware A1 and A3 with a screwdriver (not provided).
Page 5
Vendor: S000350 Step 3: Insert the panel (8) along the slot. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 4: Attach the panel (5) and (7) to panel (4) using hardware A1 and A3 with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6
Vendor: S000350 Step 6: Attach the panel (2) to panel (3) and (4) using hardware C and F. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 7: Attach hardware K1 into panel (1), (2), (3) and (4) using hardware K2 with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 7
Vendor: S000350 Step 9: Attach the Metal Side (9) to panel (3) and (4) using hardware I and F. Attach the Metal Side (9) to Metal Middle (10) using hardware J and F. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 10: Attach hardware N into hardware M.
Vendor: S000350 Step 12: Attach panel (6) to panel (3) and (4) using hardware D with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Vertical Adjustment Horizontal Adjustment Depth Adjustment...
If this is not adhered to, it could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...