Advertisement
Quick Links
Assembly Instructions
Lynx 2 Door Combination
Wardrobe
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
www.happybeds.co.uk
Advertisement
Related Manuals for Happybeds Lynx 2 Door Combination Wardrobe
Summary of Contents for Happybeds Lynx 2 Door Combination Wardrobe
- Page 1 DO NOT use this product if any parts are missing, damaged or worn. DO NOT use this product unless all fixings are secured. Please keep small parts out of reach of children. Always use on a level, even surface. Please keep these instructions for future reference. www.happybeds.co.uk...
- Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
- Page 3 Vendor: S000139 Parts List Hardware List Part Descripion Part Descripion Top Panel 8 x 30mm Wooden Dowel Shelf Simple Minifix Screw Base Panel Cam Lock Plinth Plastic Cap Left Panel 4.5 x 45mm Screw Right Panel 3.5 x 25mm Screw Door 3 x 20mm Screw Drawer Front...
- Page 4 Vendor: S000139 Step 1: Prepare these parts for assembly using hardware parts A, C, I, J, M, N, O, and Q. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Page...
- Page 5 Vendor: S000139 Step 2: Attach the left panel (5) to the shelf (2) and base panel (3) using hardware parts D and E with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 3: Attach the plinths (4) to the left panel (5) using hardware parts D and a screwdriver (not provided).
- Page 6 Vendor: S000139 Step 5: Attach the top panel (1) using hardware part F and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 6: Atach hardware part P to the side using hardware part H, the attach hardware part L to the base using hardware part K.
- Page 7 Vendor: S000139 Step 7: Connect the back panels (13) with the spine (14) and secure using hardware part K and a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 8: Assemble the drawer components using harware parts D, E, F, G, J, and Q.
- Page 8 Vendor: S000139 Step 9: Insert the hanging rail (15) to the rail supports (P). Attach the doors (7) to the left panel (5) and right panel (6) using hardware parts M and N. Attach the handles (17) to the doors (7) using hardware parts G and a screwdriver (not provided).
-
Page 9: General Care And Maintenance
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...