Summary of Contents for Happybeds Loxley Ottoman 4ft Velvet Bed
Page 1
DO NOT jump on the product or any of its parts. DO NOT use this product if any parts are missing, damaged or worn. DO NOT use this product unless all fixings are secured. Please keep these instructions for future reference. www.happybeds.co.uk...
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 3
Assembly Instructions For a chance to win a Love 2 Shop Thank you for voucher simply post a picture of your new product on your preferred social purchasing a channels tagging Birlea Furniture and #ShareYourStyle using the hashtag and #Birlea . One winner will be product.
Page 4
Loxley Ottoman Bed - King Assembly Instructions Before you begin... 1. Please check you have received the correct product. 2. Unpack all boxes and lay out each component on the floor. 3. Check your product for any damage that may be immediately obvious. If damage is identified, please contact your retailer.
Page 5
Box 1 H.Slats(x28) T. Bed Cross Bar(x4) A.Headboard (x1) W.Front and Back Frame Rail(x2) X.Cross Support Bar(x2) Box 2 B. Side Rails (x2) D. Left & Right Frame Rail (x2) Centre Support Rail (x1) Footboard (x1) Centre Slat Caps (x14) metal hook (X2) Q.
Page 6
Box 2 Cont... M6x16mm Bolts (x16) M8x16mm Bolts (x4) A1. M8x65mm Bolts (x4) M8x30mm Bolts (x8) M8x40mm Bolts (x6) BOX 3 Support Board(X2) Support Board(X2) Step 1 Unpack all components from the boxes and check you are not missing anything. Please check these against the list on page 3 &...
Page 7
Step 2 Attach 2x Legs to the 1x Headboard and then attach 2x Legs to the 1x Footboard . Please do not use any power tools for this assembly as it will void your guarantee. Step 3 Attach 2x Side Rails to 1x Headboard and 1x Footboard using 8x M8x30mm Bolt...
Page 8
Step 4: To attach the corner bracket (V)to the headboard(A),footboard(F) and side rails(B)you will need to use hardware parts 8X M6x16mm Bolts Y) and the M4 allen key(C1). To fix the 4 X bed cross bar( T ) to the side rails ,you will need to use hardware 8X M6x16mm Bolts Y) and the M4 allen key(C1).
Page 9
Step 6 To attach the front frame rail(W)and back frame rail(W)to the left frame rail (D)and right frame rail(D), you will need hardware parts 4 X (Z) with the M5 allen key(O). M8x16mm Bolts To attach the centre support bar(C) to the front frame rail(W)and back frame rail(W),you will need hardware parts 4X (S) and 4X (K) with the M5 allen key(O) and the spanner(P).
Page 10
Step 8 Slot each Slat Cap (Q) onto the end of each Slat (H), then slot each Slat (H) into each Centre Slat Cap (R). Press firmly into each slat rail located on the inside of the side rails (B) and then into the Centre Support Rail (C). Page 8 of 8...
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...