Advertisement
Quick Links
Assembly Instructions
Lynx 4 Drawer Chest
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
www.happybeds.co.uk
Advertisement
Related Manuals for Happybeds Lynx 4 Drawer Chest
Summary of Contents for Happybeds Lynx 4 Drawer Chest
- Page 1 Assembly Instructions Lynx 4 Drawer Chest Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
- Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
- Page 3 Vendor: S000139 Identification of Accessories Descripion Part 5 x 60 mm Screw Parts List Glue Descripion Spine Part Top Panel Bushing Left Panel 8 x 30mm Wooden Dowel Right Panel Small Plastic Foot Strap Plinth Simple Minifix Screw Drawer Front Left Drawer Panel Cam Lock Right Drawer Panel...
- Page 4 Vendor: S000139 Step 1: Attach the metallic slide (XB) to the right panel (3) using hadware part P5. Insert hardware part E using a small mallet (not provided) and the part J using screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. FOR UP 1st HOLE FOR FRONT...
- Page 5 Vendor: S000139 Step 4: Attach the left panel (2) and right panel (3) to the plinths (4) and centre support (11) using hardware part L and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 5: Attach the top panel (1) using hardware parts L then attach hardware parts E7 to the base using hardware part N.
- Page 6 Vendor: S000139 Step 7: To secure the item to the wall use hardware parts A, B3 and E9 using a drilling machine (not provided) and a screwdriver (not provided). Then attach hardware part P5 to the item with a screwdriver (not provided). Birlea Furniture advise you use the wall straps provided to further enhance the safety of this product.
- Page 7 Vendor: S000139 Step 10: Attach the drawer slide XC e XD in the underside of the drawer using hardware part P5 with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 11: Insert the drawers on the metallic slide as shown bellow.
-
Page 8: General Care And Maintenance
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...