Advertisement
Quick Links
Loxley 4ft, 4ft6 & 5ft Velvet Bed
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Assembly Instructions
Title of Product
.
.
www.happybeds.co.uk
Advertisement
Related Manuals for Happybeds Loxley 4ft
Summary of Contents for Happybeds Loxley 4ft
- Page 1 Assembly Instructions Title of Product Loxley 4ft, 4ft6 & 5ft Velvet Bed Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
- Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
- Page 3 Assembly Instructions For a chance to win a Love 2 Shop Thank you for voucher simply post a picture of your new product on your preferred social purchasing a channels tagging Birlea Furniture and #ShareYourStyle using the hashtag and #Birlea . One winner will be product.
- Page 4 Loxley Bed - King Assembly Instructions Before you begin... 1. Please check you have received the correct product. 2. Unpack all boxes and lay out each component on the floor. 3. Check your product for any damage that may be immediately obvious. If damage is identified, please contact your retailer.
- Page 5 Box 1 Slats (x28) Headboard (x1) Box 2 B. Side Rails (x2) Centre Support Rail (x1) Support Leg (x2) Footboard (x1) G. Legs (x4) H. M8x30mm Bolts (x12) Flat Washer (x8) Spring Washer (x8) Nuts (x4) M5 Allen Key (x1) N.
- Page 6 Step 1 Unpack all components from the boxes and check you are not missing anything. Please check these against the list on Page 3. Should you identify any missing components, please contact the retailer you purchased the bed from. Step 2 (D).
- Page 7 Step 3 Next, attach 2x Support Leg ( ) to 1x Centre Support Rail ( ) using 4x M8x40mm Bolts ( ), Allen Key ( ), 4x Nuts ( ) and Spanner ( Step 4 Attach 2 x Side rails (B) to 1 x Headboard (A) and 1 x Footboard (D) using 8 x M8x30mm Bolt (H), 8 x Spring Washer (K), 8 x Flat Washer (J) and 1 x M5 Allen Key (L).
- Page 8 Step 5 Slot each Slat Cap (N) onto the end of each Slat (F), then slot each Slat (F) into each Centre Slat Cap (O). Press firmly into each slat rail located on the inside of the side rails (B) and then into the Centre Support Rail (C). Page 6 of 6...
-
Page 9: General Care And Maintenance
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...
Need help?
Do you have a question about the Loxley 4ft and is the answer not in the manual?
Questions and answers