Using the Macro feature
The Macro feature makes it possible to perform a series of operations with the press of a single button. For example,
when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button
to start playback. The Macro feature lets you perform all of these operations simply by pressing the CD macro button.
The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros
(see page 76).
Press a macro button
CD
Macro buttons
STANDBY
SYSTEM
POWER
A
B
PHONO
TUNER
CD
MULTI CH IN
V - AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
*1
You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. (Power control may not be synchronized with this unit depending on the component. For
details, refer to the operating instructions for the connected component.)
*2
Playback can be started for any YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or DVD
recorder. When using macros to operate other components, you will need to program the play button on the control area of that
component (see page 72) or set a remote control code (see page 70).
*3
When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
To automatically transmit these signals in order
SYSTEM
POWER
First
Second
STANDBY
SYSTEM
POWER
—
—
SYSTEM
POWER
(*1)
REMOTE CONTROL FEATURES
CD
(CD area)
Third
—
—
—
—
—
—
—
—
PHONO
—
(*3)
TUNER
—
CD
(CD area) (*2)
MULTI CH IN
—
V - AUX
—
CBL/SAT
—
MD/TAPE
(MD/TAPE area) (*2)
CD-R
(CD-R area) (*2)
DTV
—
VCR 1
(VCR 1 area) (*2)
DVR/VCR2
(DVR/VCR 2 area) (*2)
DVD
(DVD area) (*2)
75