System Options - Yamaha RX-V2500 Owner's Manual

You can use the following parameters to adjust a variety of system settings and customize the way this unit operates.
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Stereo/Surround (Stereo/Surround)
Use to edit sound field parameters (see page 89).
Input Select (Input select)
Use to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the output volume of each jack.
Item
I/O Assignment Assigns jacks according to the component to be used.
Volume Trim Adjusts the output volume of each jack.
Rename Changes the name of the input.
Multi CH Assign Selects the number of audio channels input through the MULTI CH INPUT jacks
Manual Setup (Manual setup)
Use to manually adjust speaker and system settings.
Sound (Sound)
Use to manually adjust the sound parameters.
Item
LFE Level Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Dynamic Range Adjusts the dynamic range for Dolby Digital or DTS signals.
Parametric EQ Adjusts the tonal quality of each speaker.
Tone Control Adjusts the tonal balance of the speakers and headphones.
Audio Option Customizes overall audio settings for this unit.
Basic (Basic)
Use to quickly setup basic system parameters.
Item
Test Tone Turns the test tone output on or off for Speaker Set, Speaker Distance and Speaker Level settings.
Selects the output mode suitable for each speaker, the speakers for low-frequency signal output,
Speaker Set
and the cross over frequency.
Speaker Distance Adjusts the delay time of each speaker.
Speaker Level Adjusts the output level of each speaker.

SYSTEM OPTIONS

Features
Features
Features
SYSTEM OPTIONS
Page
56
56
57
57
Page
58
58
59
59
60
Page
61
61
64
64
53