Yamaha RX-V2500 Owner's Manual page 38

PLAYBACK
Enjoying 2-channel software in surround
Signals input from 2-channel sources can also be played
back on multiple channels.
Set AMP/SOURCE/TV to AMP, then press
STANDARD on the remote control to switch
between the SUR. STANDARD and SUR.
ENHANCED programs.
STANDARD
Or press MOVIE or THX on the remote control to
select the MOVIE THEATER or THX programs.
MOVIE
4
Press SELECT on the remote control to select
the decoder.
SELECT
You can select from the following modes depending on the
type of software you are playing and your personal
preference.
When you select the SUR. STANDARD program
PRO LOGIC
Dolby Pro Logic processing for any sources.
PLII Movie
Dolby Pro Logic II processing for movie software.
PLII Music
Dolby Pro Logic II processing for music software.
PLII Game
Dolby Pro Logic II processing for game software.
PLIIx Movie
Dolby Pro Logic IIx processing for movie software.
PLIIx Music
Dolby Pro Logic IIx processing for music software.
PLIIx Game
Dolby Pro Logic IIx processing for game software.
Neo:6 Cinema
DTS processing for movie software.
Neo:6 Music
DTS processing for music software.
36
6
THX
or 5
7
When you select the SUR. ENHANCED, MOVIE
THEATER or THX program
PRO LOGIC
Dolby Pro Logic processing for any sources.
PLII Movie
Dolby Pro Logic II processing for movie software.
PLIIx Movie
Dolby Pro Logic IIx processing for movie software.
Neo:6 Cinema
DTS processing for movie software.
y
• You can also select a decoder with the Decode Type parameter
in the Stereo/Surround menu (see page 89).
• You can also select a decoder by pressing l / h on the remote
control when the decoder type is displayed in the short message
display.
Note
The Pro Logic IIx decoder is not available when Surround Back is
set to "None" (see page 62).