Yamaha RX-V2500 Owner's Manual page 66

SYSTEM OPTIONS
Speaker Distance (Speaker distance)
Use this feature to manually input the distance of each
speaker and adjust the delay applied to the respective
channel. Ideally, each speaker should be the same distance
from the main listening position. However, this is not
possible in most home situations. Thus, a certain amount
of delay must be applied to the sound from each speaker
so that all sound will arrive at the listening position at the
same time.
Manual Setup > Basic > Speaker Distance >
Test Tone
Speaker Set
Speaker Distance
Speaker Level
Unit (Unit)
Choices: Meter, Feet
Initial setting:
U.S.A. and Canada models: Feet
Other models: Meter
• Select "Meter" to input speaker distances in meters.
• Select "Feet" to input speaker distances in feet.
Presence R
Subwoofer
Unit
Front L
Front R
Speaker Distances
Choices: 0.3 to 24.00 m (1 to 80 ft)
Initial setting: 3.00 m (10.0 ft)
• Front L adjusts the distance of the front left speaker.
• Front R adjusts the distance of the front right speaker.
• Center adjusts the distance of the center speaker.
• Surround L adjusts the distance of the surround left
speaker.
• Surround R adjusts the distance of the surround right
speaker.
• Surround Back L adjusts the distance of the
surround back left speaker.
• Surround Back R adjusts the distance of the
surround back right speaker.
• Presence L adjusts the distance of the presence left
speaker.
• Presence R adjusts the distance of the presence right
speaker.
• Subwoofer adjusts the distance of the subwoofer.
y
This menu item is also available in the front panel display system
options menu (see page 85).
64
Subwoofer
Unit
Front L
Front R
Center
Meter
Feet
Notes
• You cannot adjust the distance of speakers set to "None" in
Speaker Set.
• If you are only using one surround back speaker, connect it to
the SURROUND BACK (SINGLE) jack, and adjust the
distance in Surround Back L.
Speaker Level (Speaker level)
Use these settings to manually balance the speaker levels
between the front left speakers and each speaker selected
in Speaker Set (see page 61).
Manual Setup > Basic > Speaker Level
Speaker Set
Speaker Distance
Speaker Level
Choices: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB
• Front L adjusts the balance of the front left speaker.
• Front R adjusts the balance of the front right speaker.
• Center adjusts the balance of the center speaker.
• Surround L adjusts the balance of the surround left
speaker.
• Surround R adjusts the balance of the surround right
speaker.
• Surround Back L adjusts the balance of the surround
back left speaker.
• Surround Back R adjusts the balance of the
surround back right speaker.
• Presence L adjusts the balance of the front left and
presence left speakers.
• Presence R adjusts the balance of the front left and
presence right speakers.
• Subwoofer adjusts the balance of the subwoofer.
y
• To calibrate correctly to THX reference levels, use the Test
Tone (see page 61).
• This menu item is also available in the front panel display
system options menu (see page 85).
Notes
• You cannot adjust the level of channels set to "None" in
Speaker Set.
• If you are only using one surround back speaker, connect it to
the SURROUND BACK (SINGLE) jack, and adjust the balance
in Surround Back L.
Presence R
Subwoofer
Front L
Front R
Center